Number of views：2224order Release Date：2020-11-26

China has a vast territory that spans across tropical, subtropical, and temperate latitudes from north to south. From east to west, it follows from plains and hills to mountains, and finally to plateau areas, with multiple different climates in one season; Taking winter and spring as an example, in the Sanya Hainan region, the weather is generally around 20 to 33 degrees Celsius, while in the Hubei Henan region, the temperature ranges from -5 to 10 degrees Celsius. In Inner Mongolia, Xinjiang, and Heilongjiang, the temperature is generally around -5 to -25 degrees Celsius.

The temperature difference is so large that different temperatures require attention to maintenanceLCD splicing screenEveryone should be aware that LCD splicing screens have gaps and support 7x24 hours of continuous operation. The gaps can effectively alleviate the occurrence of screen breakage accidents caused by thermal expansion and contraction of LCD splicing screens. Today, the editor will talk to you about the precautions for operating and maintaining LCD splicing screens in cold weather in spring and winter.

Precautions for Operation and Maintenance of LCD Splicing Screen in Cold Spring and Winter Weather

   LCD splicing screenThe operating manual states that the optimal temperature range for using a LCD screen is between 50 degrees Celsius and 0 degrees Celsius. However, this is only a theoretical statement. The optimal temperature range for using a LCD screen is between 10 and 30 degrees Celsius. If the temperature is too high or too low, it will affect the display effect (causing the LCD molecules to be affected by temperature). If the temperature is too harsh to a certain extent, it will also cause the LCD splicing screen to have bad pixels, and in severe cases, it may even burn out, ultimately leading to scrapping.

In the north, not only is the weather cold and dry, but there is also a lot of dust. Therefore, when using LCD splicing screens, it is necessary to ensure a clean environment and avoid the entry of oil and dust. It is best to regularly clean the dust on the LCD splicing screens. Many products require more attention to daily maintenance and upkeep, and the longer the service life of the equipment, the more convenient it is to operate. LCD splicing screens are no exception.

Precautions for Operation and Maintenance of LCD Splicing Screen in Cold Spring and Winter Weather

The maintenance of LCD splicing screens can be approached from these three points
1. If a malfunction occurs:

If the LCD splicing screen malfunctions during use, remember to disassemble it without professional guidance to avoid damage. You should immediately contact the manufacturer's after-sales personnel for a professional repair plan.

2. When the temperature is too low:

However, it is recommended to stop using the LCD splicing screen wall when the ambient temperature exceeds minus 20 degrees Celsius and restart the large screen when the ambient temperature stabilizes.

3. Maintenance of optical components:

Pay attention to the maintenance of daily optical components to prevent premature aging of splicing screens. This requires frequently placing large screen optical equipment in a well ventilated environment to prevent any possible moisture damage; Regularly conduct comprehensive cleaning of the optical equipment for splicing large screens (in simple terms, cleaning the screen surface) to ensure the brightness and contrast of the large screen display system.

Precautions for Operation and Maintenance of LCD Splicing Screen in Cold Spring and Winter Weather

When the LCD splicing screen is shipped from the manufacturer, the guarantee is very high. It can only be shipped after 72 hours of aging and various quality tests are received after receiving the order. If customers pay attention to it in the subsequent useLCD splicing screenMaintain it, there are basically no problems anymore.